All Products Item ID: #189


Pool Deck Sealer



FREE SHIPPING USA!
NOW $130.00

Make It A Kit = $10:

Add Additional Gallons Of Sealer = $100:


Product Information:

Basement Self Solve Pool Deck Sealer: About The Basement Self Solve Pool Deck Sealer is a deep penetrating sealer that provides a barrier against water penetration, moisture, staining, deterioration and minor household spills. This non-slick sealer creates a barrier against water absorbing into the concrete and will protect the concrete from spalling, which is when chunks of concrete break […]

Item Description

Basement Self Solve Pool Deck Sealer: About

The Basement Self Solve Pool Deck Sealer is a deep penetrating sealer that provides a barrier against water penetration, moisture, staining, deterioration and minor household spills. This non-slick sealer creates a barrier against water absorbing into the concrete and will protect the concrete from spalling, which is when chunks of concrete break away from the concrete structure. Moisture will not be absorbed and water will bead up rather than soak into the concrete. It penetrates the concrete substrate and chemically bonds itself. Our sealer is long lasting and can be reapplied with ease.

Basement Self Solve Pool Deck Sealer Prevents and Inhibits:
Moisture penetration
Deicing salt attack
Corrosion of steel reinforcement
Spalling
Efflorescence

Advantages:
Water-based emulsion
VOC compliant
Substrate traction remains the same
No color change
Chemical bond to substrate
Protection against deicing salt

Active Content:
7%-10% water based Oligmoerous Alkylalkoxy Siloxane
NCHRP Report 244 – 78% Reduction in Chloride ion content
Vapor Transmission- Excellent. No Moisture retained after 21 days.
Water Penetration through Masonry ASTM E-514 (10% Siloxane) (With Simulated wind driven rain at 62.5 mph 100.6 kph) Average Reduction- 85%

In-Depth Description:

Basement Self Solve Pool Deck Sealer is a silane/siloxane emulsion that acts a water repellent treatment for mineral substrates such as stone, brick, concrete and mortar.  Basement Self Solve Pool Deck Sealer penetrates and provides water repellency by chemically reacting with the substrate.  The active ingredients in this product are small molecules that penetrate deep into the substrate surface.  After the emulsion breaks, these active ingredients react with moisture to produce hydroxyl groups.  These hydroxyl groups bind with the substrate and each other to produce a hydrophobic treatment that inhibits water absorption into the substrate.  This treatment does not change the appearance of the substrate and reduces spalling due to freeze-thaw and efflorescence, thereby increasing the life of the substrate.

Basement Self Solve Pool Deck Sealer: Uses / Coverage

The Basement Self Solve Pool Deck Sealer is made to work on anything concrete such as driveways, garage floors, concrete walkways and sidewalks. If you have issues like spalling, a chalky surface or an inferior concrete pour then this product is for you. This gallon of sealer needs to be mixed with four gallons of warm water. Once mixed, the sealer can cover approx. 1,200 square feet. The 1,200 square foot coverage is dependent upon how porous the surface area is. Typically, newer concrete (10-15 years old) is less porous (which means it absorbes less), so you will require less.

The sealer should only be applied to virgin concrete that has not been painted or chemically treated with any other product. If the forecast predicts rain within at least 12 hours then wait to apply. Do not apply if temperature is below 40 degrees. It cannot be applied if it has a chance to freeze. Do not apply to freshly poured concrete. Allow it to cure for 28 days.

Basement Self Solve Pool Deck Sealer: Concentrated Form

The Basement Self Solve Pool Deck Sealer is sold in concentrated form. Mixing the sealer with warm water allows for an easy application. Buying the sealer in a concentrated form gives you an advantage over pre-mixed sealers because you are able to use warm water which will help to open up the capillaries of the concrete.

Product Comparison

Our competitor’s products do not strengthen and do not get into the pores and capillaries. Our competitor’s also sell their product in non-concentrated form which means 2 things. First, our competitor’s gallon contains 20% product and 80% water. Ours is 100% product. Second, since theirs is already mixed you do not have the ability to use warm water which is what helps open up the capillaries of the concrete.

Instructions:

Stir before use. The substrate surface must be completely dry.  Allow 24 hours of dry time before application.  Application temperatures are between 40 Fand 100F.  Do not apply if rain is expected in 24 hours.  Do not apply in high winds.  Cover and protect all glass, metal and vegetation from overspray.

Apply a single application of Basement Self Solve Pool Deck Sealer with low pressure spray equipment, roller or brush.  Use a fan spray nozzle for greatest efficiency.  On vertical surfaces apply the material starting at the bottom of the wall.  Work your way up the wall so that Basement Self Solve Pool Deck Sealer will run down the surface 6 inches below the spray pattern.  For porous vertical applications, apply a second application while the first is still wet.  On horizontal surfaces, Basement Self Solve Pool Deck Sealer should be applied to completely flood the surface.  Coverage rate will average 125 sq.ft. /gal.  Spread puddles with a brush or broom.  Keep traffic off of the surface for 1-4 hours or until the surface is dry.

Drying Time
Will dry to a clear transparent film in 1-2 hours at around 72 F.

Clean Up
Clean equipment and tools with hot soapy water.  Overspray can be cleaned immediately with hot soapy water.  Dried residue can be cleaned with a mild citric acid or very hot water, then scrubbed with a plastic sponge.

Limitations
Keep material from freezing.  To prevent damage to nearby shrubbery and landscaping, cover or protect with drop cloth.  Do not apply during inclement weather or when inclement weather is anticipated within 12-24 hours.  A test application is recommended to determine coverage rate and performance.  Allow 5-7 days prior to testing for the product to fully react.

This Pool Deck Sealer includes:

  • 1 gallon container

Item Reviews

Leave a Reply


0 Basement Waterproofing Products is Upfront